Carbon,nitrogen and phosphorus recovery from liquid swine wastes: a review

Due to the pollution characteristics of the wastewater generated in piggeries, these waste streams have to be treated before discharging into the environment. These wastes have a high content of organic matter, nitrogen and phosphorus that can be converted or recovered into valuable products. The valuation of swine waste by anaerobic digestion has already been assessed, but no systematic review on the technologies used for recovering nutrients from this waste has been reported to date. Therefore, the present work has the goal of presenting the most studied technologies to different scales of recovery of carbon (i.e. organic matter), nitrogen and phosphorus from swine waste. The main characteristics and parameters of the processes involved in these technologies (mainly air stripping, membrane, enhance biological phosphorus removal and struvite formation) are also highlighted, pointing out its advantages and disadvantages and posing some final feasibility considerations on the subject addressed. Experiments reported in the literature proved that technologies used for nutrient recovery from swine waste are mostly applied to the effluents previously treated by anaerobic digestion as a primary treatment, and greater effort is required for the future implementation of these technologies in large scale. © 2020 Society of Chemical Industry     

An investigation on the recycling of hydrated cement from concrete demolition waste

Construction and demolition waste (CDW) recycling is generally limited to the use of the coarser fraction as aggregate for new concrete. The recovery of fine aggregates requires a cleaning by removing the hydrated cement waste (HCW). In this paper, the possibility to use HCW extracted from CDW as alternative component for the production of new clinker is explored.A pure HCW sample was prepared and used in partial replacement of natural materials in raw admixtures for new clinker production. At a replacement degree of 30%, a new Portland clinker containing almost 50% of C₃S could be produced with a huge spare in the release of CO₂ (about 1/3 less). At higher HCW dosage a non-Portland clinker containing almost 80% of C₂S has been obtained: its use as supplementary cementing material in blended cements revealed satisfying long term performances.     

Fast removal of Pb(II) and Cu(II) from contaminated water by groundwater treatment waste: impact of sorbent composition

ABSTRACT

A non-hazardous groundwater treatment waste (GWTW) was examined as a low-cost sorbent for Pb(II) and Cu(II) ions. The content of the dominant elements in GWTW was as follows: 78% Fe₂O₃, 7.4% P₂O₅, 7.4% CaO and 5.2% SiO₂. The removal of Pb(II) and Cu(II) was fast, and more than 67–95% of ions were accumulated by GWTW during the first 3 min. The sorption capacity of GWTW depends on solution pH, concentration and temperature. Equilibrium data fitted well with Langmuir–Freundlich and Langmuir-partition models. The inherently formed nano-adsorbent could be utilized for the treatment of water contaminated with Pb(II) and Cu(II) ions.     

铝灰的回收处理及资源化利用研究现状

铝灰是铝工业生产过程中产生的有害固体废物,每年的产生量达到上百万吨。铝灰的大量堆积会引起严重的环境与公共安全问题。铝灰中含有较多的金属铝及其氧化物、氮化物,综合回收利用铝灰对减少环境压力、提升铝行业的经济效益具有重要意义。阐述了铝灰的火法和湿法处理工艺,通过比较得出无盐火法工艺和湿法工艺是值得开发的工艺。介绍了铝灰在耐火材料、陶瓷产品、氢气制备以及工程材料等领域的综合利用现状及研究进展。指出在进一步巩固和发展铝灰原有的高附加值资源化利用的同时,应加强对铝灰处理过程中产生的气体的利用。建议根据铝灰的特性进一步开发新的资源化利用方向。     

废弃电子化学品处理处置标准现状及发展方向

重点介绍了废弃电子化学品定义、产生来源、处理处置现状、处理处置标准化现状及标准发展方向。从废弃电子化学品行业实际情况出发,具体分析了行业现状、处理处置水平及标准化工作的开展情况等。通过标准的制定实施,以及其创新驱动作用的发挥,规范了行业处理处置行为,推动行业科技进步,对全面提升废弃电子化学品处理处置技术水平,实现循环经济、绿色产业和资源化利用有着十分重要的作用。     

Statistical optimization of biodiesel production from sunflower waste cooking oil using basic heterogeneous biocatalyst prepared from eggshells

A statistical design of experiments DOE was applied to investigate biodiesel fuel BDF production process from sunflower waste cooking oil SWCO using heterogeneous bio-catalyst produced from eggshells ES. It was based on 3 level D-optimal design involving as factors methanol:oil M:O molar ratio, catalyst concentration (wt%), reaction time (min) and mixing rate (rpm). Twenty runs were carried out. A predictive linear interaction model has been correlated finding out how significant the effects of these variables are in practice. LINGO software was used to find out the optimum values of the aforementioned variables for enhancing the process. According to the results obtained, the most dominant positive factor influencing the response variable (% BDF yield) was M:O molar ratio followed by catalyst concentration (wt%) and mixing rate in a decreasing order while the reaction time showed to have a negative effect on the yield. The maximum BDF yield (98.8% and 97.5%, predicted and experimental, respectively) was obtained at M:O 6:1 M ratio, catalyst concentration 3 wt%, reaction time 30 min, mixing rate 350 rpm and 60 °C. Also response surface methodology RSM has been applied to study the interactive effects of independent variables on BDF yield. It was found that, the interaction between M:O and catalyst concentration (wt%) has more significant effect than interaction between other variables. The activity of the produced bio-catalyst was comparable to that of chemical CaO and immobilized enzyme Novozym 435. All the physicochemical characteristics of the produced BDF using the prepared bio-catalyst and its blends with petro-diesel fuel PDF are completely acceptable and meet most of the required standard specifications.     

催化裂化催化剂制备过程中水资源的综合利用

在催化裂化催化剂制备过程中会产生大量废水,这些废水来源于分子筛和催化剂的交换、过滤、洗涤及后改性过程中引入的铵盐、新鲜水及或酸碱等交换介质的残存液。通过分析过程中废水产生的原因及性质,将废水按不同性质分类收集,并采用不同的处理方法,重新回用于制备体系中,提高水资源循环利用率,降低外排废水量。     

Stress corrosion cracking susceptibility of P285NH and API 5L X65 steel grades in the high-level radioactive waste repository cell concept

Since 2014, the concept developed for the disposal of high-level radioactive waste in the French deep geological repository project Cigéo includes a cement-based grout material. This cement-based grout material will be injected between the casing and the claystone to neutralize the potential acidity resulting from the claystone oxidation induced by the drilling process of the disposal cell. In these conditions of pH (around 10.5) and temperature (90°C, maximum expected during the disposal), the metallic materials could be sensitive to stress corrosion cracking (SCC). In this project, different environments (aerated or deaerated, at room temperature or at 90°C) and synthetic solutions are considered to reproduce the different periods expected during the long life repository. The project is based on electrochemical measurements (polarization curves to define the SCC critical domain of potentials), slow strain rate tensile tests, and long-term immersion for crack initiation and propagation tests.     

Irradiation-induced large bubble formation and grain growth in super nano-grained ceramic

In this work, 0.5TRPO•0.5Gd₂Zr₂O₇ ceramic with an average grain size of only ∼15 nm was prepared by a high pressure (5 GPa/520 °C) sintering method. Phase evolutions and microstructure changes of the as-fabricated super nano and micron-grained ceramics under a high-dose displacement damage induced by 300 keV Kr²⁺ ions were investigated. The results show that the super nano-grained ceramic has low degree of amorphization, obvious grain growth (2–3 times in grain size) and big Kr bubbles (10–68 nm) formation after irradiation. The micron-grained ceramic was severely amorphized after irradiation and many microcracks were formed parallel to its surface. The formation mechanism of Kr bubbles in the super nano-grained ceramic is on account of grain boundary diffusion and migration induced by the accumulation of the injecting Kr ions and irradiation defects. Nevertheless, microcracks formed in the micron-grained sample are caused by the accumulation of Kr atoms.